FAQ

Requirements

• The interior of your vehicle must have a consistent width of at least 110 cm .
• The boot depth up to the rear seat must be at least 70 cm .
• A sleeping area of ​​185 cm should be available. The front seats may need to be pushed all the way forward and the backrests adjusted to an upright position.
• The folded-down rear seat serves as a support for the slatted bed base. The height should be approximately 32 cm. If not, the height to the slatted bed base must be adjusted.
• As an alternative to folding down the rear seats, Euroboxes can also be used.
• Two tension straps are needed for attaching to the seatbelt holder or the headrests.
• The vehicle floor must be straight and level for the modular installation of the C-BOX.
• During transport, it is recommended to secure the C-BOX in the vehicle using tension straps. The lashing points in the vehicle's trunk can be used for this purpose.

C-BOX one “premium” split
Width 110/73 cm
Depth 70 cm
Height 34 cm

Total area including slatted frame
Width 110/73 cm x Depth 185 cm

Total weight
56 kg

Suitable vehicle types:
High roof combinations such as B. VW Caddy, Citroën Berlingo, Dacia Dokker, Renault Kangoo, Peugeot Rifter, Fiat Doblo, Toyota Proace City Verso, and many more.

Requirements

• The interior of your vehicle must have a consistent width of at least 70 cm .
• The boot depth up to the rear seat must be at least 70 cm .
• A sleeping area of ​​185 cm should be available. The driver's seat may need to be pushed all the way forward and the backrest adjusted to an upright position.
• The folded-down rear seat serves as a support for the slatted bed base. The height should be approximately 32 cm. If not, the height to the slatted bed base must be adjusted.
• As an alternative to folding down the rear seats, Euroboxes can also be used.
• Two tension straps are needed for attaching to the seatbelt holder or the headrests.
• The vehicle floor must be straight and level for the modular installation of the C-BOX.
• During transport, it is recommended to secure the C-BOX in the vehicle using tension straps. The lashing points in the vehicle's trunk can be used for this purpose.

C-BOX one “premium” for 1 person
Width 70 cm
Depth 70 cm
Height 34 cm

Total area including slatted frame
Width 70 cm x Depth 185 cm

Total weight
43.5 kg

Suitable vehicle types:
High roof combinations such as B. VW Caddy, Citroën Berlingo, Dacia Dokker, Renault Kangoo, Peugeot Rifter, Fiat Doblo, Toyota Proace City Verso, and many more.

Requirements

• The interior of your vehicle must have a consistent width of at least 110 cm .
• The boot depth up to the rear seat must be at least 70 cm .
• A sleeping area of ​​185 cm should be available. The front seats may need to be pushed all the way forward and the backrests adjusted to an upright position.
• The folded-down rear seat serves as a support for the slatted bed base. The height should be approximately 32 cm. If not, the height to the slatted bed base must be adjusted.
• As an alternative to folding down the rear seats, Euroboxes can also be used.
• Two tension straps are needed for attaching to the seatbelt holder or the headrests.
• The vehicle floor must be straight and level for the modular installation of the C-BOX.
• During transport, it is recommended to secure the C-BOX in the vehicle using tension straps. The lashing points in the vehicle's trunk can be used for this purpose.

C-BOX one “premium” for 2 people
Width 110 cm
Depth 70 cm
Height 34 cm

Total area including slatted frame
Width 110 cm x Depth 185 cm

Total weight
56 kg

Suitable vehicle types:
High roof combinations such as B. VW Caddy, Citroën Berlingo, Dacia Dokker, Renault Kangoo, Peugeot Rifter, Fiat Doblo, Toyota Proace City Verso, and many more.

Requirements

• The interior of your vehicle must have a consistent width of at least 120 cm . We would be happy to offer you an adjustment to a width of 115 cm.
• The boot depth up to the rear seat must be at least 70 cm .
• A sleeping area of ​​190 cm should be available. The front seats may need to be pushed all the way forward and the backrests adjusted to an upright position.
• The folded-down rear seat can serve as support for the slatted bed base. The height should be approximately 51 cm. If not, the height to the slatted bed base must be adjusted. Please measure the height of the folded-down rear seat and include this measurement with your inquiry/order.
• As an alternative to folding down the rear seats, Euroboxes can also be used.
• Two tension straps are needed for attaching to the seatbelt holder or the headrests.
• The vehicle floor must be straight and level for the modular installation of the C-BOX.
• During transport, it is recommended to secure the C-BOX in the vehicle using tension straps. The lashing points in the vehicle's trunk can be used for this purpose.

C-BOX two “premium”
Width 120 cm (optional 115 cm)
Depth 70 cm
Height 53 cm

Total area including slatted frame
Width 120 cm x Depth 192 cm

Total weight
64 kg

Suitable vehicle types:
Minibuses/vans such as the VW T5/T6 Transporter, Multivan, California Beach.

For these vehicle types, please measure the height of the folded-down rear seat:
Mercedes V-Class/Vito/Viano, Ford Tourneo Custom.

Adjustable width to 115 cm for:
Citroen SpaceTourer, Peugeot Traveler, Toyota Proace Verso, Opel Zafira Life, and many more.

Module

The C-BOX consists of individual modules. The major advantage is that the C-BOX can be installed and removed by one person, giving you greater flexibility in using the camping box. For example, you can use only the left module, the "drawer." This leaves space on the right for items such as your bicycle or other belongings.

Screen printing plates, also known as multiplex plates

Screen printing plates consist of at least five layers of veneer, which are glued together with the grain twisted against each other. This ensures that they remain dimensionally stable even in humid conditions.
Screen printing plates, also known as multiplex panels, are plywood sheets with at least five layers of veneer of identical thickness. These veneer layers are also referred to as core layers in woodworking. The core layers of screen printing plates typically have a thickness between 0.8 and 2.5 millimeters. To achieve the total thickness of up to 80 millimeters, up to 35 layers of veneer are bonded together. This allows for different appearances on the cut edges of the multiplex panels. Screen printing plates also feature various surface designs and are now mostly made from beech or birch wood.

The production of the screen printing plates

The individual layers of a screen printing plate are glued together. Waterproof adhesives such as melamine resin, resorcinol resin, phenolic resin, or combinations thereof are used for this purpose. Screen printing plates are most commonly made using cross-lamination, which is defined as each layer being rotated 90 degrees relative to the next veneer layer. Cross-lamination is used to increase the dimensional stability of the screen printing plates.

This prevents the absorption of moisture from causing swelling and thus an increase in the size of the individual veneer layers.

This dimensional stability can also be achieved by using different angles during cross-lamination. Furthermore, cross-lamination ensures that the plywood panels are highly tensile-resistant in all directions.

Gas stoves, mattresses and cool boxes

C-BOX one “premium” & split

When selecting a gas stove, the following dimensions should not be exceeded to ensure it fits in the designated space in the drawer: width 62 cm, depth 30 cm, height 12 cm. The folding mattress can be approximately 110-120 cm wide and up to 200 cm long, depending on the vehicle. The maximum space available for the cooler is 38 cm wide, 65 cm deep, and 26.5 cm high.

• PRIMUS KINJIA STOVE gas stove
• PRIMUS TUPIKE STOVE gas stove
• Folding mattress C-BOX one
• Folding mattress C-BOX split

C-BOX two “premium”

When selecting a gas stove, the following dimensions should not be exceeded to ensure it fits in the designated space in the drawer: width 62 cm, depth 30 cm, height 15 cm. The folding mattress can be approximately 120-140 cm wide and up to 200 cm long, depending on the vehicle. The maximum space available for the cooler is 38 cm wide, 65 cm deep, and 45 cm high.

• PRIMUS KINJIA STOVE gas stove
• PRIMUS TUPIKE STOVE gas stove
• Folding mattress C-BOX two

Installation and removal of the C-Box

Installation by two people:

The C-BOX can be installed and removed from your vehicle while fully assembled. For this to work, it's only important that the base and back panel are mounted and the tabletop is in place to ensure the necessary stability when lifting the C-BOX.

Installation of one person:

1. Place module drawer* on the left side of the vehicle
2. First, connect the base plate to the back panel and then to the drawer module.
3. Connect module (storage space) to base plate and back wall
4. Insert the tabletop and attach the slatted frame to the C-BOX.

--> Assembly instructions <--

Customizations & special orders

Adjustments

We will gladly implement minor adjustments to the C-BOX for you.

Custom-made

If you're looking for a custom conversion or a camping box tailored to your exact specifications, we look forward to your inquiry.

Contact form

Shipping costs C-BOX

• Within Germany (excluding islands) : €149.00
  
• to Switzerland including export declaration and customs clearance : 250.00 CHF
  

Shipping costs for outdoor table base

• within Germany (excluding islands) 9.90 euros
  

Local pickup is also possible by appointment.

Production time

The C-BOX is manufactured to order.

The current production time for your C-BOX is 2-3 weeks.